You are hereCatalog / Cell Phones / EST EST-DCS980 DCS 1800 1710~1880Mhz 27dBm+ Cell Phone Signal Repeater(100V~220V AC)
EST EST-DCS980 DCS 1800 1710~1880Mhz 27dBm+ Cell Phone Signal Repeater(100V~220V AC)
-
Specifications:
Frequency range
Uplink 1710~1785MHz Downlink 1805~1880MHz
Gain ( dB)
Uplink Gp≥60 Downlink Gp≥65
Export power (Po)
≥27dBm
Pass band ripple
≤3dB
I/O impedance
50Ω/N connector
Noise figure
≤4dB
Transmission Delay
≤0.5μs
Ambient temperature
-10˚C ~ 60˚C
Power supply
AC110 - 220V±10% 45 - 55Hz
Size
220 x180 x 20 mm
Reliability
To the GB6993-86 standard
Electromagnetic compatibility
To the ETS300 694-4 standard
Function
a) Power supply LED denote
b) Export power LED denote
Coverage Area
1000 m2
Features:
- Works for 1710~1880Mhz signal range
- Designed to amplify DCS1800 cell phone signals
- Requires outdoors antenna to operate (F-cable connector)
- Cell Phone Signal Repeater extends cell phone coverage to areas that have poor or no cell phone signal
- Broadband repeater
- High-Gain, ALC
- Heat rediation can work for a long time
Details:
- This Cell Phone Signal Repeater provides the ultimate solution in any area where cellular communications can not work well due to leak of signals
- Compact design makes this GSM Cell Phone Signal Repeater can last long time
- This Cell Phone Signal Booster significantly improves the performance of any cellular device experiencing weak signal inside of buildings
Installation Approaches:
- Fix up outdoor antenna reception on housetop and point to signal tower
- Connect outdoor antenna to ''outdoor'' port in repeater machine through cable
- Connect indoor antenna(s) to ''indoor'' port in repeater machine through cable also
- Plug power adaptor into AC power socket and finish installation
Technique Supporting:
- If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve
- Please adjust the direction of outdoor antenna if it cannot call out
- If strength is not steady, please check if outdoor and indoor antenna are too close. Please ensure the outdoor and indoor antenna have distance of 20 meters at least ,with a wall between and net a same horizontal line
NOTE:
- The distance between the outdoor antenna and the amplifier is not more than 30 meters
- The outdoor Antenna not close to a large antenna, high-voltage lines, transformers, or metal mesh, etc.
- The distance between the indoor antenna and the amplifier is not more than 40 meters
- The indoor antennas do not close to the wall as far as possible in order to increase the coverage area
- The indoor antenna and the outdoor antenna are advised to stay away from each other for more than one floor distance to prevent cyclic signal amplification
- If lack of communication quality, please change the installation position of the outdoor antenna and adjustment the indicate direction of antenna
- It is best to enclose waterproof tape at the junction, and prevent moisture narrow the indoor signal coverage area
- Try to straight the cable, do not bend more than 90 degree
Package Included:
- 1 x Cell Phone Signal Amplifier
- 1 x 100~240V AC Adapter
- Login to post comments










