You are hereCatalog / Cell Phones / EST EST-WCDMA/UMTS980 WCDMA 2100 1930~2180MHz 100V~220V AC 20dBm+ Cell Phone Signal Repeater
EST EST-WCDMA/UMTS980 WCDMA 2100 1930~2180MHz 100V~220V AC 20dBm+ Cell Phone Signal Repeater
-
Specifications:
Frequency range
Uplink 1930~1990MHz Downlink 2110~2180MHz
Gain ( dB)
Uplink Gp≥60 Downlink Gp≥65
Export power (Po)
≥20dBm
Pass band ripple
≤3dB
I/O impedance
50Ω/N connector
Noise figure
≤4dB
Transmission Delay
≤0.5μs
Ambient temperature
-10℃ ~ +60℃
Power supply
AC110~220V 45~55Hz
Size
220 x180 x 20 mm(L x W x H)
Reliability
To the GB6993-86 standard
Electromagnetic
compatibility
To the ETS300 694-4 standard
Function
a) Power supply LED denote
b) Export power LED denote
Coverage area
1000 m2
Features:
- The Cell Phone Signal Repeater works for 1930~2180Mhz signal range
- The Cell Phone Signal Repeater is designed to amplify WCDMA 2100 cell phone signals
- Requires outdoors antenna to operate (F-cable connector)
- Extends cell phone signal coverage to areas where have poor or no cell phone signal
Details:
- The 20dBm Signal Repeater is designed to amplify cell phone signals
- The 20dBm Signal Repeater is made of high quality material, durable and reliable for long time use
What is a cell phone signal amplifier?
An outdoor antenna installation position must be able to clear call Yagi installation must be installed level
Installation Approaches:
- Fix up outdoor antenna reception on housetop and point to signal tower
- Connect outdoor antenna to ''outdoor'' port in repeater machine through cable
- Connect indoor antenna(s) to ''indoor'' port in repeater machine through cable also
- Plug power adaptor into AC power socket and finish installation
Technique Supporting:
- If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
- Please adjust the direction of outdoor antenna if it cannot call out
- If strength is not steady, please check if outdoor and indoor antenna are too close. Please ensure the outdoor and indoor antenna have distance of 20 meters at least ,with a wall between and net a same horizontal line
NOTE:
- The distance between the outdoor antenna and the amplifier is not more than 30 meters
- The outdoor Antenna not close to a large antenna, high-voltage lines, transformers, or metal mesh, etc.
- The distance between the indoor antenna and the amplifier is not more than 40 meters
- The indoor antennas do not close to the wall as far as possible in order to increase the coverage area
- The indoor antenna and the outdoor antenna are advised to stay away from each other for more than one floor distance to prevent cyclic signal amplification
- If lack of communication quality, please change the installation position of the outdoor antenna and adjustment the indicate direction of antenna
- It is best to enclose waterproof tape at the junction, and prevent moisture narrow the indoor signal coverage area
- Try to straight the cable, do not bend more than 90 degree
Package Included:
- 1 x Cell Phone Signal Amplifier
- 1 x 100~240V AC Adapter
- Login to post comments










